إضاءة محطات الوقود LED
What should I check before buying LED canopy lights?
LOWCLED supplies LED canopy lights in 80W-120W for petrol stations, forecourts and covered walkways. Every range ships with datasheets, IES photometric files, OEM/ODM branding and a 3-7 year warranty (3-5 years indoor, 5-7 years outdoor). Send the target lux, mounting height and site layout and our engineers return a lighting plan.
بيانات القياس الضوئي: فهرس ملفات IES المقاسة فعلياً · 2027 catalogue
Source: LOWCLED in-house specification tables and datasheets, updated 2026-11.
LOWCLED builds LED canopy lights in 80W, 100W and 120W (LL-CL series) for petrol station forecourts, covered walkways and loading canopies. Output runs from 11,000 lm to 19,000 lm depending on colour temperature, in a die-cast aluminium body with a PC lens, 150° optic, IP65, on 100-277V AC. CRI above 70, 3000K / 4000K / 6500K, five-year warranty, CE / RoHS.
On this page: models & output · forecourt layout · canopy vs wall pack vs high bay · build & certification · FAQ
إضاءة محطات الوقود LED Wholesale for Petrol Stations & Canopies
Lowcled supplies 80W-120W surface-mounted and recessed LED canopy lights for petrol station canopies, loading bays, drive-throughs and covered walkways. Canopy fixtures are engineered for 24/7 operation with high CRI, 5000K daylight output and IP65 sealing.
- Wholesale supply: factory-direct canopy light pricing, flexible MOQ, consistent batches for multi-site rollouts.
- OEM / ODM: private-label branding, custom mounting accessories, photocell and dimming options.
- Project support: IES photometric files and Dialux canopy layouts for petroleum franchise standards.
For gas station lighting tenders and distributor pricing, contact our canopy light team.
Three wattages, three colour temperatures each
The canopy range is short on purpose: a forecourt is a defined space with a defined mounting height, and three wattages cover it. Each wattage is built in three colour-temperature variants, and the output rises as the colour temperature rises because the same LED count is driven harder at cooler CCT — 11,000 lm at 3000K against 13,000 lm at 6500K on the 80W model.
The 150° optic is the defining feature. A canopy light sits under a soffit 5-6 m above the pump island and has to spread light across the whole forecourt without a hot spot under the fixture, which is why the optic is wider than a wall pack and why the fixture is surface-mounted rather than bracketed.
| الموديل | Power | 3000K | 4000K | 6500K | Optic | IP |
|---|---|---|---|---|---|---|
| LL-CL-80W | 80W | 11,000 lm | 12,000 lm | 13,000 lm | 150° | IP65 |
| LL-CL-100W | 100W | 14,000 lm | 15,000 lm | 16,000 lm | 150° | IP65 |
| LL-CL-120W | 120W | 16,000 lm | 18,000 lm | 19,000 lm | 150° | IP65 |
Values are the published datasheet figures. All models: SMD2835, die-cast aluminium + PC, 100-277V AC 50/60 Hz, CRI >70, -40 to +40°C.
Forecourt layout: how many fixtures per island
A petrol station forecourt is specified at 50-100 lux under the canopy, higher at the pump island than at the edges, with the canopy structure itself defining where the fixtures can go. The practical unit is one fixture per bay pair: a 100W or 120W canopy light over each island covers two pump positions and the vehicle footprint around them.
Two things are checked before the count is fixed. First, the canopy height: a 150° optic at 5 m spreads about 18 m across, so fixtures can be 6-8 m apart; at 6.5 m the same optic spreads further and the spacing opens up. Second, the colour temperature: 4000K is the usual forecourt choice because it reads as bright without the blue cast of 6500K, which some brands avoid for merchandise colour rendering.
| Canopy area | Mounting height | Fixtures | Typical result* |
|---|---|---|---|
| 12 x 8 m, two islands | 5-5.5 m | 2 x 80W | about 55 lux average |
| 16 x 10 m, two islands | 5.5-6 m | 2 x 100W or 3 x 80W | about 60 lux average |
| 20 x 12 m, three islands | 6-6.5 m | 3 x 120W | about 65 lux average |
| 24 x 14 m, four islands | 6.5-7 m | 4 x 120W | about 60 lux average |
* Indicative averages from the lumen output at 4000K, assuming a canopy reflectance of 0.7 and no obstruction; a forecourt design normally requires a DIALux calculation against the local standard. Send the canopy drawing for the layout.
Canopy light, wall pack or high bay: which one belongs here
All three are box-shaped fixtures and they are not interchangeable. A canopy light is surface-mounted under a soffit with a 150° optic, so it spreads light across a horizontal plane from close range. A wall pack mounts on a vertical wall with a 90° optic and lights the ground in front of the wall. A high bay hangs from a ceiling with a narrower optic and is built for 8-15 m mounting heights and higher ambient temperatures.
Where the boundary blurs is a covered loading canopy 8-10 m up: a canopy light still works to about 7 m, above that the high bay range gives better control and a longer reach. Below 4 m, for a walkway soffit, the mini wall pack or the small panel range is a better fit than a 120W canopy fixture.
| Fixture | Mounting | Optic | Height | Best for |
|---|---|---|---|---|
| Canopy light | Surface, under soffit | 150° | 4-7 m | petrol forecourt, covered walkway |
| Wall pack | Vertical wall | 90° / 90x65° | 3-10 m | building perimeter, doorway |
| High bay | Suspended | 60° / 90° / 120° | 6-15 m | warehouse, hangar, indoor arena |
See wall packs and high bay lights for the other two ranges.
Build, sealing and certification
The body is die-cast aluminium with a PC lens and a flat front, sealed to IP65 — the grade a forecourt needs, because the fixture is washed by rain driven under the canopy and by the pressure washer used on the apron. Operating temperature is -40 to +40°C, which covers a forecourt canopy in most climates; the driver is mounted in the housing away from the LED board.
| Attribute | Specification |
|---|---|
| Ingress protection | IP65 |
| Housing | Die-cast aluminium + PC lens, flat glass front |
| Optic | 150° |
| Input voltage | 100-277V AC, 50/60 Hz |
| Colour temperature | 3000K / 4000K / 6500K |
| CRI | >70 |
| Certification | CE, RoHS |
| الضمان | 5 years |
الشهاداتs on the certificate page. For hazardous areas around fuel storage, ask for the explosion-proof range instead of a standard canopy light.
Frequently asked questions
How many canopy lights for a two-island petrol station?
Two 100W units on a 16 x 10 m canopy at 5.5-6 m give about 60 lux average, which is the usual forecourt target. If the canopy is 20 m or wider, use three 120W units and check the uniformity at the edges with a layout.
Which colour temperature is normal for a forecourt?
4000K. It reads as bright white without the blue cast of 6500K, which tends to flatten merchandise colours in the shop window. 3000K is used where the site sits in a residential area and the warmer tone is required by planning.
Can a canopy light be used outdoors without a canopy?
It is IP65 and will survive rain, but the 150° optic is designed for a soffit 4-7 m above the surface. Without a canopy the light spills sideways and upward, which is glare for neighbours; use a flood light or a shoebox instead.
Do you offer an emergency battery version?
Emergency and central-battery options are quoted per project rather than as a catalogue line, because the enclosure and the battery size depend on the required duration and the local code.
Is the canopy light suitable for a hazardous area?
No. Around fuel storage and vapour zones the correct fixture is an explosion-proof light, which this range is not. Tell us the zone classification and we quote the Ex-rated range instead.
Do you supply the mounting brackets?
The fixture is surface-mounted with the bracket supplied; pendant and recessed mounting are quoted per project.
Related ranges: wall packs for the shop and the building perimeter, flood lights for the apron and the entrance, tri-proof lights for the car wash and the service bay.
إضاءة محطات الوقود LED Wholesale for Petrol Stations & Canopies
Lowcled supplies 80W-120W surface-mounted and recessed LED canopy lights for petrol station canopies, loading bays, drive-throughs and covered walkways. Canopy fixtures are engineered for 24/7 operation with high CRI, 5000K daylight output and IP65 sealing.
- Wholesale supply: factory-direct canopy light pricing, flexible MOQ, consistent batches for multi-site rollouts.
- OEM / ODM: private-label branding, custom mounting accessories, photocell and dimming options.
- Project support: IES photometric files and Dialux canopy layouts for petroleum franchise standards.
For gas station lighting tenders and distributor pricing, contact our canopy light team.